Eberspächer now
offers a miniature diesel fueled water heating system designed
specifically for the motorhome market.
The HYDRONIC independent heating system is the cost effective
alternative to a traditional gas heating systems combining the very
latest self-regulating technology with extremely low power and fuel
consumption.
The heating system offers automatic sensing and temperature control of
the vehicle interior, and at the same time providing sufficient stored
hot water for domestic needs.
For saloon heating only the Airtronic is
the perfect solution.
Screen demisted and defrosted prior to departure.
• Control panel incorporating timer, temperature control and thermostat
sensor.
• Two Fan speed selection for day or night operation.
• Hot water only/hot water & heating selection.
• Self Regulating. Thermostat control of vehicle cab heater.
• Small and compact.
• No need for unnecessary bulk gas storage. How
the system works
The Hydronic circulates the engine coolant to the hot water-tank and fan
matrix situated in the rear of the vehicle. The engine is also preheated
by the returning coolant. The schematic below shows the heating system
components and these interface with the engine coolant.
The Hydronic is
mounted within the engine compartment and connected into the engine
coolant system using Tee Pieces. The main pipe runs should be 20mm I/D
Rubber Hose reduced to 15mm I/D as near to the hot water-tank and Fan
Matrix as possible.