Mobile Power AC/DC

Inverters can offer a clean, true power conversion, providing you with reliable AC voltage from your DC supply. Many aspects must be considered, especially the discharge levels & durability of your batteries.

Our vast experience can understand your exact needs & demand, enabling us to design a resiliant 'system' to match your immediate and foreseeable future needs.

Small scale / portable convenience

Solid power / permanent installation

Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

 

Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

 

Virtually unlimited power thanks to parallel operation
Up to 6 Quattro’s can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Pure sinewave output, high peak power and highefficiency.
Combined high frequency and line frequency technologies ensure the best of both worlds.

Models range from 150VA to 3000VA per module.
Scalable: up to six Phoenix Inverters 3000 can be paralleled in single phase, split phase and three phase configuration.

Phoenix Inverter Compact 12 / 24 Volt

Inverters – 230 volts on the road!

Whether car, motorhome or boat – it makes sense to have a 230-volt socket on board your recreational vehicle. After all, enjoying your holiday means being able to use the electrical gadgets you are used to. The problem is they work on 230 volts, while your vehicle batteries generate 12 or 24 volts and their capacity is limited. How do you turn 12 or 24 volts direct current into 230 volts alternating current? Quite simply, by using a WAECO inverter. The WAECO inverter programme is just as varied as the applications they are put to. It accounts for all your needs – regardless of whether you “just” want a low-priced, compact unit to run your laptop, or a high-performance inverter for your microwave oven or professional coffeemaker.

Mini-size inverters for mobile use:
PocketPower SI 102/TSI 102
Sales representatives, craftsmen, technical service crews – more and more business travellers depend on their laptops. Mobile computers work on limited battery power. So they are likely to let you down when you need them most. Connected in the line between the notebook and the cigarette lighter, PocketPower smart inverters put you on the safe side. The compact units take power from the 12-volt car battery to ensure hassle-free operation of your mobile computer by keeping its battery fully charged all the time.

The inexpensive PocketPower SI102 generates a sine-wave-like 230-volt alternating voltage, which is perfectly adequate for many applications. The new PocketPower TSI102 is the best choice to ensure the safe and smooth operation of highly sensitive electrical appliances: its pure sine wave voltage, earthed safety socket and other comfort features place this product in a class of its own.

Nominal input voltage:	12 volts DC (11 to 15 volts)
Output voltage/curve:	230 volts AC/ modified sine wave
Output voltage USB:	5 volts / 0.5 A
Output frequency:	50 Hz
No-load current:	< 0.4 A
Continuous power:	100 watts
Peak power:	200 watts
Low-voltage cut-off:	10.8 volts
Cooling:	Ventilator
Efficiency:	up to 90%
Dimensions (WxHxD):	67 x 43 x 125 mm
Weight:	0.28 kg
Test marks:	ECE-R10 certified, CE
Item designation:	PocketPower SI 102, 100 watts, 12 volts
Ref. No.:	2222600001

Safe, compact, inexpensive:
PerfectPower PP 152/PP 154/PP 402/PP 404/PP 602/PP 604
PerfectPower inverters turn 12- or 24-volt battery voltage into a sine-wave-like 230-volt alternating voltage. These “mobile mains sockets” provide power for virtually all gadgets that make life on board a recreational vehicle more comfortable. Available in five capacity ratings – from a 150-watt entry-level model to the 2000-watt high-performance inverter for professional use. All units have been completely revised to combine premium quality with distinctive, elegant design. Neat installation with adjustable mounts. The 1000- and 2000-watt models offer the additional comfort of a mains priority circuit, a mounting plate, and a cable organiser.

Input voltage:	PP152: 12 volts (11 - 15) DC PP154: 24 volt (22 - 30) DC
Output voltage/curve:	230 volts AC/ modified sine wave
Output frequency:	50 Hz
No-load current input:	0.25 A
Continuous power:	150 watts
Peak power:	350 watts
Efficiency:	up to 90%
Dimensions (WxHxD):	129 x 71 x 177 mm
Weight:	approx. 0.84 kg
Quality features:	Overload and short circuit protection, over-voltage and low-voltage cut-off, reverse pole protection by fuse, overheat cut-off, can be switched on or off using external switch, individually adjustable clip-on mounts, cigarette lighter plug
Test marks:	ECE-R10 certified, CE
Item designation:	PerfectPower PP152, 150 watts, 12 volts
Ref. No.:	PP152
Item designation:	PerfectPower PP154, 150 watts, 24 volts
Ref. No.:	PP154

Input voltage:	PP402: 12 volts (11 - 15) DC PP404: 24 volts (22 - 30) DC
Output voltage/curve:	230 volts AC/ modified sine wave
Output frequency:	50 Hz
No-load current input:	0.25 A
Continuous power:	350 watts
Peak power:	700 watts
Efficiency:	up to 90%
Dimensions (WxHxD):	129 x 71 x 192 mm
Weight:	approx. 0.99 kg
Quality features:	Overload and short circuit protection, over-voltage and low-voltage cut-off, automatic reverse pole protection by fuse, overheat cut-off, can be switched on or off using external switch, individually adjustable clip-on mounts
Test marks:	E-approved to EMV guideline ECE-R10, CE
Item designation:	PerfectPower PP402, 350 watts, 12 volts
Ref. No.:	PP402
Item designation:	PerfectPower PP300, 300 watts 24 volts
Ref. No.:	PP404

Input voltage:	PP602: 12 volt (11 - 15) DC PP604: 24 volt (22 - 30) DC
Output voltage/curve:	230 volts AC/ modified sine wave
Output frequency:	50 Hz
No-load current input:	0.25 A
Continuous power:	550 watts
Peak power:	1100 watts
Efficiency:	up to 90%
Dimensions (WxHxD):	129  x 71 x 237 mm
Weight:	approx. 1.4 kg
Quality features:	Overload and short circuit protection, over-voltage and low-voltage cut-off, automatic reverse pole protection by fuse, overheat cut-off, can be switched on or off using external switch, individually adjustable clip-on mounts
Test marks:	ECE-R10 certified, CE
Item designation:	PerfectPower PP602, 550 watts, 12 volts
Ref. No.:	PP602
Item designation:	PerfectPower PP604, 550 watts, 24 volts
Ref. No.:	PP604

For power-intensive 230-volt appliances:
PerfectPower PP 1002/PP 1004/PP 2002/PP2004
Microwave ovens, toasters and vacuum cleaners are real “power burners”, yet convenient to have on board. Operation is no problem either with a high-performance inverter from the new PerfectPower series described above. The 1000- or 2000-watt models generate a sine-wave-like 230-volt alternating voltage for particularly powerful appliances. User benefits add up to an all-round treat including perfect design, premium quality, and a variety of technical extras for enhanced comfort. Just take the mains priority circuit designed to switch over to mains power as soon as it is available. Or the soft-start function, which ensures gentle starting even where powerful appliances are concerned. Cable organisers, exhaust air adapter, outputs for remote control and external ON/OFF switch, adjustable mounts, mounting plate – the new PerfectPower high-performance inverters leave nothing to be desired!

Input voltage:	PP1002: 12 volts (11 - 15) DC PP1004: 24 volts (22 - 30) DC
Output voltage/curve:	230 volts AC/ modified sine wave
Output frequency:	50 Hz
No-load current input:	0,5 A / 0,6 A
Continuous power:	1000 watts
Peak power:	2000 watts
Cooling:	Ventilator
Efficiency:	up to 85%
Mains priority:	Integrated
Mains input:	230 volts AC / 10 A
Dimensions (WxHxD):	176 x 95 x 338 mm
Weight:	approx. 3.5 kg
Quality features:	With mains priority circuit, electronic overload and short circuit protection, outputs for remote control and external ON/OFF switch, individually adjustable clip-on mounts, cable organiser and mounting aid
Test marks:	ECE-R10 certified, CE
Item designation:	PerfectPower PP1002, 1000 watts, 12 volts
Ref. No.:	PP1002
Item designation:	PerfectPower PP1004, 1000 watts, 24 volts
Ref. No.:	PP1004
Accessory	Standard remote control Ref. No.: MCR-9

Input voltage:	PP2002: 12 volts (11 - 15) DC PP2004: 24 volts (22 - 30) DC
Output voltage/curve:	230 volts AC/ modified sine wave
Output frequency:	50 Hz
No-load current input:	0,5 A / 0,6 A
Continuous power:	2000 watts
Peak power:	4000 watts
Cooling:	Ventilator
Efficiency:	up to 85%
Mains priority:	Integrated
Mains input:	230 volts AC / 10 A
Dimensions (WxHxD):	176 x 95 x 443 mm
Weight:	approx. 5.0 kg
Quality features:	With mains priority circuit, electronic overload and short circuit protection, outputs for remote control and external ON/OFF switch, individually adjustable clip-on mounts, cable organiser and mounting aid
Test marks:	ECE-R10 certified, CE
Item designation:	PerfectPower PP2002, 2000 watts, 12 volts
Ref. No.:	PP2002
Item designation:	PerfectPower PP2004 2000 watts, 24 volts
Ref. No.:	PP2004
Accessory

Standard remote control
Ref. No.: MCR-

Inverter or sine wave inverter?
A PerfectPower inverter with sinusoidal output voltage is absolutely fine for many applications. For more power-intensive appliances, you should opt for a PerfectPower high-performance inverter. Sensitive high-tech devices place higher demands on the quality of the supply voltage. They require a pure sine wave voltage. In these cases it is absolutely essential to use a WAECO SinePower sine wave inverter.

Here again, the most demanding electrical appliance determines the choice of the inverter. A single device on board requiring a pure sine wave voltage is reason enough for you to opt for a sine wave inverter.